fbpx

 

When doing home maintenance of any kind, it is important to be aware of the risks. This is especially true when dealing with the springs on your heavy overhead garage door. The springs of an automated garage door are essential components, as they are responsible for lifting the door and lowering it. Every time you open or close your garage door, the springs, aided by other parts of the mechanism, lift it up by counterbalancing its weight. Although electronically controlled doors are operated by an automatic garage door opener, it is not the opener itself which does the actual lifting, but the springs.

While you may not realize it, due in part to the springs, your garage door is very heavy. Of course, weight varies, depending on door size, materials used, and insulation. A small door may weigh between 100-150 pounds, medium doors range from 200 to 300 pounds, while large commercial doors can weigh more than 400 pounds! To support all this weight, the springs need to be strong and enduring. However, over time, because of daily wear, garage door springs eventually lose the ability to lift the heavy overhead garage door up and need to be adjusted or replaced.

Many homeowners may look at the signs that their garage door springs need an adjustment and think that this is surely a task they can attempt on their own, but adjusting garage door springs can be extremely dangerous. As you must know by now, garage door springs hold a lot of tension, and if they are improperly dealt with, they can cause serious injuries. So it is advisable that you let a pro do the job; your safety and well-being are more important than the hundred bucks you will save on the job.

custom residential garage door

Types of Garage Door Springs

Modern garage doors have two kinds of springs: one is responsible for torsion, the other for the extension.

Torsion springs are located above the door and work together as a pair, providing a smoother and more even operation. These are likely to break first because they open and close the door, counterbalancing its weight. They are typically oil tempered or made of galvanized steel. The endurance of torsion springs is determined by the size of the wire used in manufacturing the spring, the length of the spring, and its internal diameter. Most residential garage doors have two torsion springs, which are positioned above the door, in the middle part. This makes lifting easier, and in case one spring breaks, the other can support the door, preventing potential injuries and damage.

Extension springs, on the other hand, work independently of each other and run parallel to the track, helping to raise and lower the door. When the door is down, the springs extend, and when it is up, they contract. Extension springs wear more quickly than other springs because they work independently of each other, wobbling back and forth while they work. Extension springs are the most common, and they also have a great effect on how the different parts of your door unit wear down.

Dangers of adjusting garage door springs

Because of the tension on garage door springs, if they snap, they can cause significant damage to life or property. Adjustment of garage door springs presents the same dangers as a spring snapping. If the spring slips from the tool being used to hold it into place, it can become a lethal projectile. In addition, the spring can cause significant pinches to the installer. Also, when you remove the spring, the door is no longer supported by the trusted device. If the door is in the up position, it can fall along the tracks unless it is properly supported. Remember that the garage door opener is designed to lift the door with the aid of the spring, and is not trustworthy to support the door by itself. If the door falls down the track without a spring, then its weight could crush a human or cause significant property damage. Doors with glass windows could send broken glass shards flying upon impact. This glass may be flying both inside and outside of the garage. The glass itself presents significant dangers.

This is why garage door spring adjustment is not a job for an amateur but should be left up to a professional. Not only will professionals have the correct tools for the job, but they will have a better knowledge of these springs. They should have been trained to install these springs so that there will not be an injury to people or harm to property.

If the above has not convinced you to bring in a professional, at least call for a price quote before attempting the job yourself. You may find that since a professional can do this installation in less that one hour, the cost is little more than you would pay for the replacement springs. If you have to buy special tools, any savings may be lost on a tool that you will not use again for seven years. You may spend even more than if you had the job done professionally.

Garage Door Spring Adjustment In DFW, TX

Let us just reiterate that garage door spring adjustment is a hazardous job; and that if you are not an engineer or otherwise mechanically inclined, you should go ahead and get a professional to do it for you. If you are looking for garage door experts in Dallas Fort-Worth, Texas, get in touch with us today.

Don’t wait for your garage door springs to snap and injure someone or damage your car. Keep them operating the way they were meant to with garage door spring adjustment from the pros at Integrity Garage Doors. Pick up your phone and call (972) 520-2577 to learn more.

 

Need Garage Doors or Openers for Your Home or Business?

Dallas-Ft Worth, TX

Get in Touch:

Integrity Garage Doors Logo

Hours

Open 7 Days a Week
7am to 7pm

Visit Our DFW Showroom

970 Security Row Suite 400
Richardson, Texas 75081